RSS

Monthly Archives: October 2016

Joyetech eVic Basic 1500mAh Box Mod

Joyetech eVic Basic 1500mAh Box Mod

Little Box Mod from Joyetech – Basic EVIC


Joyetech would not be themselves if it were not let in another product to offer. This time, the tiny EVIC Basic – devices the likes nugget, mini volts with that from Joyetech. Perhaps this is not a device to huge clouds and winning competitions, but it’s a nice supplement.

Basic eVic will be available as many as 9 colors thus on beginning we face a choice of the appropriate color. Small “evils” will have a 55mm height 32mm depth and 22mm in width.

Basic battery gives us up to 40W continuous adjustable power, we have on board a microUSB port for software update and charge the internal rechargeable battery with a capacity of 1500mAh. We also have the RTC – real time clock settings, TCR – manual temperature settings, the ability to update the software, and many other options.

At the top section of the panel was located a small, but very nice-looking fire button, just below it disputes OLED display, microUSB port and the control buttons are hidden on the bottom of the eVic Basic. On the bottom we have a hole with a hidden reset button – due to inability to pull out the batteries after any problems with software update.

Joyetech EVIC Basic Specifications:

– The dimensions of 22mm x 32mm x 55mm
– RTC – real time clock
– OLED display
– TCR – manual settings temperature
– Mode Bypass
– Capacity 1500mAh built-in battery
– Support for the wires of nickel, titanium and SS (temperature control)
– Support the resistance mode TC from 0.05 ohm
– Support resistance in the power mode of 0.1 ohm
– Maximum continuously adjustable output power 40W

 

Advertisements
 

Tags: , , ,

Mini Volt V2 40W Box Mod

Mini Volt V2 40W Box Mod

Mini Volt V2 40W by Council of Vapor

Council of Vapor released Mini Volt V2

 

Mini Volt v2 Small Box Mod

Council of Vapor releases to sell a tiny version of the V2 Mini Volt power supplie, which conquered Europe and the Western market.

Mini Volt if I’m not mistaken was the first power for such small dimensions only 35mm x 22mm x 56mm. These dimensions of Mini Volt V2 do not changeremains the same buttons layout, same construction made of zinc alloy, the same design that has won the hearts of all vapers and the same parameters.

In the Mini Volt V2 battery manufacturer changed the first essential thing. Added the function of fast charging, which will charge the battery with a capacity of 1200mAh in less than 90 minutes from full discharge – for a full charge. Given that this little one charge earlier over 2 hours – I do not see anything special, refresh and release version V2 of Mini Volt is just a marketing exercise rather than something new.

On board remains the same – stableelectronics, which gives you smooth power adjustment from 5 to 40 W. supports the resistance of 0.2 ohm up. OLED display come on very small – but it is clear and is very good fits with the rest.

 

Mini V2 Volt Technical specifications:

– Power regulation from 5 to 40W
– Fast loading (max 90 minutes from full discharge to full charge)
– The minimum resistance of 0.2 ohm
– Three modes of output
– The dimensions of 35mm x 22mm x 56mm
– Battery Capacity 1200mAh
– A number of current and short-circuit protection
– Display OLED

 

Tags: , , ,