SMOK XPRO M80 Plus Ireland
SmokTech Xpro m80 mod plus
XPro M80 mod is the new new Box with a capacity of 4400mAh, produced by well-known company SmokTech. Mod has a very good feature, which is used, inter alia, the aluminum alloy. XPRO M80 Plus allows the user to select the appropriate power range from 6W to 80W up.
The display shows all necessary information: battery level, power, voltage, and resistance heater and temperature control mode temperature is shown. Smok Xpro cope with the low-resistive heaters from 0,2Ohm and has all the standard security. Completely new is the heater temperature control system. (Order for this to work you must use heaters nickel) The temperature is displayed in degrees Fahrenheit from 200 to 900’F.
Xpro M80 Plus offers 3 modes of choice of employment: wattage, mechanical, temperature control. 510 thread allow the installation of most atomizers / clearomizers available on the market. Charging via USB. (passtrought – you can charge and vape).
Smok Xpro M80 Plus setting:
When the Xpro M80 Plus is enabled 3X press the activation button for a short time, in this way we’ll get to the menu. To navigate the menu, press the activation button. If we want to confirm specific setting, wait 2sec.
Example: Click 3 times, wait two seconds and then click it again and again and wait 2 seconds. In this way, you change the operating mode: wattage / mech.
Below is a list of messages that can display in a display case:
– “Check atomizer”: resistance heater is outside the range 0,2-9,9Ohm or there is no “contact” between the modem and the atomizer.
– “Reduced power”: the kumunikat will be displayed when the current capacity of the battery is too weak for the configuration of power / resistance.
– “Weak Battery”: means that the battery voltage is below 3,4V. In this case, connect fashion for charging.
– “Locked Click 5x”: informs us of the blockade fashion. To lock / unlock the fashion press the activation button 5 times within 2sekund.
Xpro M80 Plus kit includes:
–80W Smok XPro M80 Plus
-adapter 510 / eGo